Turning Power On/Off - Sharp AQUOS R3 SH-04L Instruction Manual

z Take care that an IC card, etc. is not placed between the handset
and wireless charger. The IC card may malfunction.
z If the camera is used during charging, the images may be
affected by noise.
z The charging speed may be reduced and charging may be
stopped to prevent the temperature of the handset from rising
depending on the operation state of the handset.
Charging with USB cable
You can charge the handset by connecting the handset to a
PC with USB cable A to C 01 (sold separately), etc.
z For details on connecting to a PC or other device
"Connecting to PC and other device"

Turning power on/off

Turning power on
„
1
9 (for at least 3 seconds)
z When you turn the power on for the first time, make the initial
☞
settings ( P. 55 "Initial settings").
Turning power off
„
1
9 (for at least 2 seconds)
2
[Power off]
Turning display on/off
„
The display is turned off when 9 is pressed or the
handset is not in use for a set length of time.
Press 9 while the display is turned off to turn it on.
Touch panel lock
„
When the power or the display is turned on, the touch panel is
locked.
Touch [
z When [Lock Photo Shuffle] is ON, the image for the lock screen
of the touch panel is automatically switched every time the
☞
display is turned on (
P. 205
Operations in touch panel lock screen
z To activate Camera: [
z To activate my daiz: [ ]
z To activate Clock: Touch the clock
43
] to unlock.
☞
P. 171 "Display").
]
Before Using the Handset