Nfc Communication - Sharp AQUOS R3 SH-04L Instruction Manual

Sending and receiving by Bluetooth
Sending data
„
Example: Still picture
1
In the home screen, select "Google"▶[Photos]
2
Touch and hold a still picture to send
3
[ ]▶[Bluetooth]
z Set the receiver's Bluetooth device to the reception stand-by
status.
4
Select a Bluetooth device to connect to
Receiving data
„
1
Data is sent from the sender's Bluetooth device
2
Drag the status bar down▶[ACCEPT] on
incoming notification
3
Drag the status bar down▶select the received
data
Receiving all data may not be available depending on the data
z
type.
When available space in the save destination becomes
z
insufficient while receiving data, the data being received to that
point are saved and receiving ends.

NFC communication

NFC stands for Near Field Communication and is a near field
wireless communication system which conforms to the
international standards set by ISO (International Organization for
Standardization). You can use the contactless IC card function,
Reader/Writer function, P2P function, etc. on the handset.
Android Beam
You can send and receive data to and from devices which
support Reader/Writer, P2P function.
z Enable [Reader/Writer, P2P] and set [Android Beam] to On in
☞
advance ( P. 139 "NFC/Osaifu-Keitai settings").
z Android Beam is not available in Airplane mode or when NFC/
Osaifu-Keitai lock is set.
z You can send and receive phonebooks, still pictures, videos, etc.
z Android Beam may not be available depending on the app.
z Communication with all devices which support Reader/Writer,
P2P function is not completely guaranteed.
203
Data Communication