Sharp AQUOS R3 SH-04L Instruction Manual page 174

[High-speed display]
Some apps may not obtain the effect. In this case, set it to OFF.
z
Also, the effect may not be obtained depending on the battery
level or handset temperature.
If you change the setting while activating the app, it may not
z
work properly.
In this case, end the app once.
[Auto-rotate screen]
This function may not follow the setting depending on the app
z
in use.
When this function is set to OFF, the screen display does not
z
rotate even if the handset is rotated, and [J] is displayed on
the navigation bar. If you touch [J], the screen display rotates.
[glove mode]
Touching operation may not be available depending on
z
materials for the glove.
Set [glove mode] to OFF when you are not wearing gloves or
z
are using the handset in a bathroom.
Illumination
The light performance is displayed on the screen when
receiving a call, charging starts, etc.
1
In the home screen, select "apps
[Settings]▶[Display]▶[Advanced]▶
[Illumination]
2
Set to On
3
Select an item
„ For incoming call: Set whether to activate Illumination when
receiving a call.
„ Illumi pattern/color for incoming
flashing pattern or a flashing color of Illumination for when
receiving a call.
When start charging: Set whether to activate Illumination
„
when charging starts.
When unlocking: Set whether to activate Illumination when
„
unlocking the touch panel.
When ending a call: Set whether to activate Illumination
„
when ending a call.
172
folder"▶
call: Make settings for a
Handset Settings