Table of Contents
Advertisement
Data management
„
z Data is not transferred
y Make sure a USB HUB is not used. If used, the transference
may not be carried out normally.
and other device"
y Make sure the use of the USB connection is set correctly.
☞
P. 205 "Connecting to PC and other device"
z Data saved on the microSD Card is not displayed
y Remove the microSD Card and insert it again.
"microSD card"
z Images are not displayed correctly
y An entire image goes black when the image data is damaged.
☞
P. 205 "Connecting to PC
☞
P. 38
Bluetooth function
„
z Cannot connect with Bluetooth connection compatible device/
Cannot find it even if searching
y Set the Bluetooth connection compatible device (commercially
available) side to the registration stand-by status and register
it from the handset side. To delete the registered device once
and register it again, both the Bluetooth connection compatible
device (commercially available) and the handset are required
to be deleted on each side.
function"
z Calls cannot be made from the handset with an external device
such as a car navigation system or hands-free device connected
y Making a call to a phone number may become unavailable if
you make multiple calls to the phone number in the condition
that the other party does not answer or outside the service
area. In this case, turn off the handset power and turn it on
☞
again.
P. 43 "Turning power on/off"
Map/GPS function
„
z Cannot set AUTO-GPS service information
y Make sure AUTO-GPS has not been suspended due to
insufficient battery level. If AUTO-GPS has been suspended
due to Low-power operation settings, you cannot set AUTO-
GPS service information. In this case, set Low-power
operation settings to [Not suspend] or charge the battery to set
☞
the service.
P. 40 "Charging" , P. 187 "docomo service/
cloud"
y Make sure [AUTO-GPS operation settings] is not disabled.
☞
P. 187 "docomo service/cloud"
222
☞
P. 201 "Using Bluetooth
Appendix/Index
Advertisement
Table of Contents
Troubleshooting
