Epson TM-P80 Technical Reference Manual page 105

Settings in SimpleAP mode (Factory default settings)
Parameter
SSID
Passphrase
IP Address
Subnet mask
Printing communication protocol
• LP, LPR:
Transfers printing data
• TCP Socket Port:
Transfers printing data and printer status via bidirectional direct socket communication.
LP, LPR
• Max. simultaneous connections:
• Number of connections for which printing is
available:
• Time out:
• Job cancel:
• Banner printing:
Socket communication
• Port type
• Port number
• Port communication direction
• Max. simultaneous connections
• Number of connections for which printing is
available
• Time out:
Notes on Wireless LAN connection
Because not all the combinations of the printer and wireless LAN devices have been checked for operation, the
operation of the printer in combination with all the wireless LAN devices is not guaranteed. Especially in the
ad-hoc mode, the printer may not operate normally, depending on the combination of the device to connect
with. Be sure to carry out evaluation of the operation before use.
Setting value
EPSON_Printer
12345678
192.168.192.168
255.255.255.0
2
1 (Other users need to wait until printing is
completed.)
1 min. (changeable)
Not available
Not available
TCP communication port for direct printing
9100
bidirectional
2
1 (Other users need to wait until printing is
completed.)
1 min. (changeable)
Appendix
105