Paper Specifications - Epson TM-P80 Technical Reference Manual

Paper Specifications

Type
Form
Size Width
Outside diameter
Roll width when taken up
Roll paper core
Specified original paper type
Paper type no.
P30023, P31023, P35024
KT55F20, KT48F20
AF50KS-E
F5041(48), F5041(55)
• For the winding direction of a thermal roll, the chromogenic side must face outside.
• Paper must not be pasted to the roll paper core.
• For the best print quality for each paper type, it is recommended to set the print density. The
92
Autocutter model
Thermal paper:
Receipt paper (without black mark)
Receipt paper (with black mark)
Roll paper
79.5 ± 0.5 mm {3.13 ± 0.02"}
76.2 ± 0.5 mm {3.00 ± 0.02"}
51.0 mm {2.01"} maximum
80.0 + 0.5/- 1.0 mm {3.15 + 0.02/- 0.04"}
Outside diameter: 18.0 mm {0.71"} or more
Width: Same as the paper width or less than the paper width by 1 mm {0.04"}
Kanzaki Specialty Papers
Koehler
Jujo Thermaloy
Mitsubishi HiTec
print density can be set with the customized value. To set customized value, See
Settings" on page 49.
Manualcutter model
79.5 ± 0.5 mm {3.13 ± 0.02"}
Manufacturer
"Software