Epson TM-P80 Technical Reference Manual page 100

Drop impact resistance
Height
∗ This is an experimental value based on our company's drop test standard; this is not a guaranteed value.
Dust/splash proof function (only for manualcutter model)
Vertical placement
Horizontal placement
∗ The values used here are measured by the printer unit based on the JISC0920(IEC60529:2001) evaluation. There-
fore, safety standard application, and failure and breakage of the printer are not guaranteed.
100
120 cm (4 feet)
IP54 equivalent
Note:
Roll paper is excluded.
When roll paper recess is installed on the bottom side.
The Connector cover is closed.
IP54 equivalent
Note:
Roll paper is excluded.
When the belt clip is installed on the bottom side.
The Connector cover is closed.