Opening the Locked Roll Paper Cover (autocutter model only)
If the roll paper cover is locked, follow the procedure below to open the cover.
1
Make sure that the printer is turned off.
2
Open the battery cover and remove the battery.
3
Turn the screw with a flathead or Phillips screwdriver, and adjust the autocutter
blade so that you cannot see it from the paper ejection part.
Once the autocutter blade returns to the correct position, you can press the open button and open the roll paper
cover.
Before adjustment
When the autocutter blade is locked
The autocutter blade is visible
from the paper eject slot.
Screw
After adjustment
When the autocutter blade is returned to the
correct position
Autocutter blade
Chapter 5 Handling
5
87