Solutions When "No Signal" Message Appears - Epson EF11 User Manual

• If the other solutions do not solve the problem, reset all of the projector settings using the options on
the Reset menu.
Parent topic:
Related references
Projector Light Status
Projector Parts - Remote Control
Projector Reset Options - Reset Menu
Related tasks
Turning On the Projector
Operating Connected Devices Using the HDMI Link Features

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:
• Press the Source Search button and wait a few seconds for an image to appear.
• Turn on the connected computer or video source, and press its play button to begin your presentation,
if necessary.
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the projector and the connected computer or video source off and then on again.
• If you are projecting using a thumb-sized media streaming device, set the HDMI EQ Setting to 1 in the
projector's Settings > Operation menu.
• Connect the video source directly to the projector.
• Try a different video cable.
• If the other solutions do not solve the problem, reset all of the projector settings using the options on
the Reset menu.
Displaying From a PC Laptop
Displaying From a Mac Laptop
Parent topic:
Related concepts
Projector Connections
Solving Image or Sound Problems
Solving Image or Sound Problems
103