Epson EF11 User Manual page 29

4. Attach the mounting plate to the projector and secure it in place with the screws that came with the
mounting plate.
Caution: Do not use the feet you removed in step 2 to attach the mounting plate. They could loosen
and cause the projector to fall. Use the screws supplied with the mount plate (M4 × 6 mm max.
depth).
5. Install the projector onto the mounting hardware or a tripod. For details, see the documentation
supplied with the mount or tripod.
Caution: When installing the projector on the mount or tripod, make sure you tighten the screws
securely. If you place the projector upside down, the screws could loosen and the projector could
fall.
When installing the projector in a high location using the safety wire set, make sure you attach the
carabiner to a point that is strong enough to support the weight of the projector and mounting
hardware.
29