Changing the Projection Mode Using the Menus
You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the
projector menus.
Note: You can also press and hold the
seconds to flip the image upside-down.
1. Turn on the projector and display an image.
2. Press the
3. Press the arrow buttons to select the Settings menu and press Enter.
4. Select the Installation setting and press Enter.
5. Select the Projection setting and press Enter.
6. Select the projection mode you want to use and press Enter.
7. Press the
Parent topic:
Adjusting the Image Height
If you are projecting from a table or other flat surface and the image is too high or low, you can adjust the
image height using the projector's adjustable foot.
A/V mute button on the projector remote control for about 6
Settings button on the projector remote control.
Settings button to exit the menu or the
Projection Modes
Esc button to return to the previous screen.
40