Epson EF11 User Manual page 87

Options
Illumination
Energy Save Standby
HDMI EQ Setting
Screen Mirroring Settings
Setting
Display Name
Operation Mode
Adjust Image Quality
Interrupt Connection
Channel
Reset
Parent topic: Adjusting the Menu Settings
Description
Turns off the indicators on the projector
Select On to send power to the connected USB device even
if the projector is in standby mode (when the power is off).
Adjusts the signal level of the HDMI input. Change the
setting if there is interference with the signal or if there is no
image.
Note: If there is no image when using a media streaming
device, select 1 as the setting value.
Options
Up to 32 alphanumeric
characters
Basic
Extended
1 to 4
On
Off
Various options
—
87
Description
Sets the device name shown
when searching for the projector
Select Extended to display
additional settings
Adjusts the quality of the screen
mirroring image. Smaller
numbers emphasize quality;
larger numbers emphasize
speed.
Select On to allow devices to
interrupt the screen mirroring
connection
Selects the wireless channel
used for screen mirroring.
Change the setting if you
experience interference.
Resets all settings on the Screen
Mirroring Settings menu