Turning Off The Projector - Epson EF11 User Manual

1. Connect the AC adapter to the projector's power inlet.
2. Plug the power cord into an electrical outlet and connect it to the AC adapter
The projector enters standby mode. This indicates that the projector is receiving power, but is not
turned on.
3. Press the
The status light flashes blue as the projector warms up. After the projector is warmed up, the status
light stops flashing and turns blue.
Warning: Never look into the projector lens when the light is on. The light can damage your eyes
and is especially dangerous for children and pets.
Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the
lens for an extended time can melt and light that is reflected back into the lens can cause the
projector to malfunction.
The Welcome Guide is displayed the first time you turn on the projector. To display the guide again,
press the Settings button on the projector remote control and select Settings > Display > Welcome
Guide.
Parent topic:

Turning Off the Projector

Turn off the projector after use.
power button on the projector or the projector remote control to turn on the projector.
Using Basic Projector Features
36