Connecting For Screen Mirroring With A Windows 8.X/Windows 10 Computer; Shutting Off The Picture And Sound Temporarily - Epson EF11 User Manual

Parent topic:
Related references
Projector Feature Settings - Settings Menu

Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer

You can set up your computer to wirelessly project images and play sound using Screen Mirroring.
1. Select the Screen Mirroring settings on your projector as necessary.
2. Press the
You see the Screen Mirroring standby screen.
3. Do one of the following:
• Windows 10: Open Action Center and select Connect.
• Windows 8.x: Select Devices > Project > Add a wireless display.
4. Select your projector's Display Name from the list.
5. If you see the PIN entry screen on your computer, enter the PIN code displayed on the Screen
Mirroring standby screen or at the bottom right of the projected image.
The projector displays the image from your computer or mobile device.
Note: It may take some time to establish the connection. Do not disconnect the projector's power
cord while it is connecting to your device. This may cause your device to freeze or malfunction.
Parent topic:
Related references
Projector Feature Settings - Settings Menu

Shutting Off the Picture and Sound Temporarily

You can temporarily turn off the projector's picture and sound. Any sound or video action continues to
run, however, so you cannot resume projection at the point that you stopped it.
1. Press the
any sound.
2. To turn the picture and sound back on, press the
Parent topic:
Wireless Network Projection from a Mobile Device (Screen Mirroring)
Source Search button on the remote control to switch to the Screen Mirroring source.
Wireless Network Projection from a Mobile Device (Screen Mirroring)
A/V mute button on the projector remote control to temporarily stop projection and mute
Adjusting Projector Features
A/V mute button again.
74