Solutions To Sound Problems - Epson EF11 User Manual

• Check your video source settings.
• Adjust the available settings on the Image menu, such as Brightness, Contrast, Tint, and/or Color
Saturation.
• Make sure you selected the correct Video Range setting in the Image menu, if available for your
image source.
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Position the projector close enough to the screen.
Parent topic:
Related references
Image Quality Settings - Image Menu
Related tasks
Changing the Color Mode
Adjusting the Hue, Saturation, and Brightness
Adjusting the Color Temperature
Adjusting the RGB Offset and Gain
Adjusting Gamma

Solutions to Sound Problems

If there is no sound when you expect it or the volume is too low or high, try the following solutions:
• Adjust the projector's volume settings.
• Press the
temporarily stopped.
• Check your computer or video source to make sure the volume is turned up and the audio output is set
for the correct source.
• Check the cable connection between the projector and your video source.
• If you do not hear sound from an HDMI source, set the connected device to PCM output.
• If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac
supports audio through the HDMI port. If not, you need to connect an audio cable.
• If you hear a hissing sound from your projector's speakers when projecting from a computer running
Windows 10 over a network, you may need to adjust the Windows 10 sound properties:
1. Right-click the speaker icon in the Windows taskbar and select Sounds.
Solving Image or Sound Problems
A/V mute button on the projector remote control to resume video and audio if they were
107