Inepro PM - Copy Coin CM7000 - Xerox Config Technical Manual page 50

Opening and cleaning the coin acceptor
The coin acceptor is attached to the f ront
plate, to detach this the triangular plastic
lev er must be retracted, the coin acceptor
can than be rotated to the opposite side.
Of all the cables, only the communication cable must be connected, the cable with the
white connector routed f rom the f ront plate must not be connected.
44 - PM - Copy Coin CM7000 - Xerox Config
Coin acceptor
The side that has the bar code sticker and
the table can opened to clean the interior.
Remov e dirt and sticky f luids with a damp
cloth. Reconnect the communication cable.