Disassemble / Assemble A Paymatic - Inepro PM - Copy Coin CM7000 - Xerox Config Technical Manual

Disassemble / Assemble a PayMatic

Disassemble / Assemble a PayMatic
1. Lay the Pay Matic, if possible,
on its back.
3. Take out the two security pins.
Open the f ront plate under a 15 degree angle.
6 - PM - Copy Coin CM7000 - Xerox Config
2. Open the bottom lid. If the coin box is
mounted on a pillar:
. Open and remov e the padlock
at the back of the pillar.
. Take out the cash box, remov e
the locking bolts f ixed on the
upper side of the pillar.
4. Slide the f ront plate down under that angle.