Menu Safety - Inepro PM - Copy Coin CM7000 - Xerox Config Technical Manual

Software Setup
Using the override key switch
The ov erride key switch is located on the f ront of the unit beneath the f our digit display .
Insert the key and turn. The display will change to FREE. Copies can now be taken without the
need f or inserting money .
For security reasons all key s supplied with this coin box are specif ic to it, The Inepro
Group cannot supply spare key s should the originals become lost. Please keep the key s in a
saf e place.
1) To activ ate the serv ice mode press the "Fu" button and simultaneously turn the ov erride
key switch into the "Serv ice" position;
2) Release the "Fu" button. On the display is display ed F.0;
3) With the "UP"and "Down"button y ou can scroll to the desired f unction address;
4) To select a f unction address press the "Fu" button to read out the current v alue. When
the Pay Matic ® COIN is equipped with a dual display the right display will illuminate and
display the v alue;
5) To modif y the v alue of the selected address press the "Up" and "Down" button;
6) To acknowledge the new setting press the "Fu" button:
- Y ou are now returned to the f unction address mode.
"Down"button y ou can select another f unction address.
7) To leav e this serv ice mode turn the ov erride key switch into the Of f position:
8) Switch the machine of f and on again, the modif ied f unctions are now activ ated.
See for the complete functions and it's descriptions

Menu safety

The menu saf ety has two security lev els.
Lev el one: No password is required, is the operator lev el. Function 0 till 28 are
av ailable.
Lev el two: Password is required. In f unction 29 y ou hav e to key in a password.
When this is correct the conf iguration lev el is av ailable.
The lev el two password f or respectiv ely a single or dual display : 45 or 0045.
Pressing the "UP"and
22
appendix I
13