Changing Cost Per Copy - Inepro PM - Copy Coin CM7000 - Xerox Config Technical Manual

Changing the cost per copy
The cost per copy is determined by the numerical v alues in the location registers 1, 2, 3, and
4
E.g. Location F1 = Price record 1 (A4 B & W)
Location F2 = Price record 2 (A4 Colour)
Location F3 = Price record 3 (A3 B & W)
Location F4 = Price record 4 (A3 Colour)
The Pay Matic Coin Copy is programmed by means of three buttons, which are integrated in
the f ront panel of the coin machine. By means of these three buttons and the adjacent
ov erride key switch it is possible to program, modif y or read the Function menu.
1) To enter the location registers press and hold the FUNCTION button then turn the key
switch to the FREE position and release the button. The display will brief ly show a number
f ollowed by F0. Press the UP button, the display now shows F1.
2) This is the register containing the price 1 copy price. Press the FUNCTION button to
display the current setting, use the UP and DOWN buttons to change the setting. When
the desired price is reached press the FUNCTION button to store the new setting.
3) Press the UP Button to mov e to the next setting. The display will now show F2, this
register contains the A4 colour copy price, to change this setting repeat the abov e
procedure.
4) This procedure can be f ollowed to alter the other copy prices if required.
5) To exit the location registers turn the key switch back to the normal position.
6) If in doubt, please check with y our serv ice prov ider bef ore carry ing out any of these
changes.
Reading copy meters
Please ref er to Appendix I
14 - PM - Copy Coin CM7000 - Xerox Config

Changing Cost per copy

32
f or reading out the copy meters / audit inf ormation.