Operator Functions - Inepro PM - Copy Coin CM7000 - Xerox Config Technical Manual

Operator functions

Operator functions
Function 00, Credit reset
By means of this program, the remaining amount of money can be reset. The duration in
minutes of the reset time is f reely programmable. Resetting the inserted amount of money
can be ef f ected when no copies are made within the programmed time.
Function 01 to Function 08, Price configurations - Standard (F18 is disabled or not
available)
All these f unctions are price conf igurations. Price 1 is "standard" the price f or A4 Black-white.
The other price conf igurations depend on the connections.
The copy price, which can be introduced in these f unctions, has to be div ided by a basic v alue
(f unction 79). If this f unction is at 1 (Euro standard) the introduced v alue is also the settled
v alue.
29
If f unction 86 is programmed at –I (see page ), only f unction 1 and f unction 2 will
f unction as price conf igurations. Function 3 is the conf iguration f or the v alue to release the
second output onto which is f requently connected the paper tray . That is why price 3 of ten
has to coincide with the v alue of price 2. The other price conf igurations (f unction 4 to f unction
8) are not applicable.
22 - PM - Copy Coin CM7000 - Xerox Config