Inepro IP Reader Technical Manual page 42

Multi tag:
Setting Descr iption
IP reader w ill read the
follow ing protocols:
E M 4x02, E M 4x05,
E M 4x50, hitag1, hitag2,
Q 5 and Ti-RF ID.
S etting 1
Because of the emulation
of the E M 4x02 card and
the E M 4x05 card by the
Q 5 card, these different
settings of S etting 1 are
supported.
S etting 2 N ot applicable
S etting 3 N ot applicable
Data 1 N ot applicable
Data 2 N ot applicable
Warning: Processing and sending of data in reversed order not
tested for the EM4x05 cards.
Mifare:
Setting Descr iption
The M ifare reader supports the 4
by tes M ifare card serial number and 7
by tes Desfire card serial number.
S etting 1 w ill be used to determine if
the order of the 4 by tes M ifare card
S etting 1
serial number should be rev ersed.
O nly 4 by tes of the Desfire card serial
number are used to calculate the
decimal card number.
S etting 2 N ot applicable
S etting 3 N ot applicable
Data 1 N ot applicable
Data 2 N ot applicable
34 - IP Reader
V alue C ar d T ypes
E M 4x50, hitag1,
0 hitag2, Q 5 and Ti-
RF ID
1 E M 4x02, E M 4x05,
E M 4x50, hitag1,
hitag2 and Ti-RF ID
3 E M 4x02, E M 4x05,
E M 4x50, hitag1,
hitag2 and Ti-RF ID
5 E M 4x02, E M 4x05,
E M 4x50, hitag1,
hitag2 and Ti-RF ID
7 E M 4x02, E M 4x05,
E M 4x50, hitag1,
hitag2 and Ti-RF ID
- -
- -
- -
- -
V alue
0
1
-
-
-
-
Behaviour
-
-
The card data of the
E M 4x02 cards w ill be
processed and send in
rev ersed order.
The card data of the
E M 4x05 cards w ill be
processed and send in
rev ersed order.
The card data of the
E M 4x02 and E M 4x05
cards w ill be processed
and send in rev ersed
order.
-
-
-
-
C ar d T ypes
C ard serial number
is calculated from
the raw data in the
rev ersed order.
C ard serial number
is calculated from
the raw data in the
normal order.
-
-
-
-