Page 1
We want to help you get the best result from your Spider RFID Reader. This manual contains information on how to do that; please read it carefully. Due to continuous product improvements this manual is subject to changes without notice.
Page 2
Spider RFID Reader Technical Manual All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the publisher.
Table of Contents Introduction Requirements Components Test 1 Software ................................ 2 2 Hardware ................................ 4 User Interface 1 LED's ................................ 5 Technical Specifications Troubleshooting...
Page 4
End of life directives Inepro is paying a lot of attention to environmentally-friendly production. Your new device contain materials which can be recycled and reused. At the end of its life specialised companies can dismantle the discarded device to recycle the reusable materials and to minimise the amount of materials to be disposed of.
Introduction Introduction In this manual you find the instructions to install and configure your <Spider RFID Reader. This manual is meant for all the Inepro Spider RFID Reader. This manual, the Spider RFID Reader hardware and software are subject to change, make sure you have the latest version of this manual, because the older versions may have become obsolete.
Software For the Spider RFID Reader there is are tools available each with its specific features. Connect the Spider RFID Reader to a computer or laptop and present a card to the reader. Please note that the reader needs to have the HID RAW Configuration.
Test Software for the predecessors of the Spider RFID Reader. Specific Spider RFID Reader tools might be created in a later stage. Quick-Test with the Notepad: 1. Connect to Inepro Spider RFID Reader to the USB PC or laptop. 2. Start a Text Editor application on Windows, such as Word or Notepad.
Reader is powered and has yellow and the green LED should lit. connection Yellow: card detected Green: card recognised. This concludes the hardware test Pondweg 7 | 2153 PK, Nieuw-Vennep | The Netherlands | +31 252 744044 | info@inepro.com | inepro.com...
Functio n No rm al No t OK Card is not recognized Card in detection field Card Recognized Reader is on Flashes connected connection) Pondweg 7 | 2153 PK, Nieuw-Vennep | The Netherlands | +31 252 744044 | info@inepro.com | inepro.com...
Symptom(s): Card not recognized Prognosis: The Spider RF ID Reader is not connected Scope: All Devices Resolution: Pondweg 7 | 2153 PK, Nieuw-Vennep | The Netherlands | +31 252 744044 | info@inepro.com | inepro.com...
Page 11
Check if the problem occurs also with other cards, or on other devices. C - If the problem has not been solved, please contact your supplier Pondweg 7 | 2153 PK, Nieuw-Vennep | The Netherlands | +31 252 744044 | info@inepro.com | inepro.com...
Need help?
Do you have a question about the Spider RFID Reader and is the answer not in the manual?
Questions and answers