Subscribe to Our Youtube Channel
Related Manuals for Inepro MagStripe - PayCon II
Summary of Contents for Inepro MagStripe - PayCon II
- Page 1 MagStripe - PayCon II Assembly Work Instruction | MagStripe - PayCon II Assembly © 2019 Inepro B.V. All rights reserved...
- Page 2 Table of Contents Magstripe Assembly http://www.inepro.com Version 1.0.6 Inepro B.V.
- Page 3 Magstripe Assembly Part...
- Page 4 3. Guide the Magstripe data, the PayCon power and network cable and any other cables (copier) the PayCon has to be connected to, trough the bracket hole(s) Magstripe COM 1 closed flap w ith PayCon w ith all flaps connection pow er cable and closed Magstripe connected MagStripe - PayCon II Assembly...
- Page 5 PayCon and you are ready) Copier bracket Pillar bracket PayCon 8. While holding the screws (so they don't fall out) turn the PayCon bracket back up 9. Put the small plastic spacer into place Copier bracket Pillar bracket R 6 - www.inepro.com - 3...
- Page 6 15. Check the PayCon if the Magstripe COM setting is set to the COM port you have connected it with. For more information on how to set the COM port settings, please refer to your PayCon technical manual. MagStripe - PayCon II Assembly...
Need help?
Do you have a question about the MagStripe - PayCon II and is the answer not in the manual?
Questions and answers