Inepro IP Reader Technical Manual page 34

Network without PoE (normal network
connection)
·
Connect the network cable to the network connector
marked no PoE (the rightmost network connector in
the picture above).
·
Place the power adapter cable in the black connector
(shown on the left)
·
Connect the adapter to a power socket.
Place the Card Reader
·
Stick the reader with the adhesive tape to the side of
the machine and / or use the screws to attach it even
more firmly.
·
Place the cover over the screw holes.
·
Strip the protection from the adhesive tape and use
(parts) of the cable guides, to guide the cable to the
back of the machine.
26 - IP Reader