Inepro IP Reader Technical Manual page 25

LEDs (Light Emitting Diodes)
IP Controller Board Ethernet Connector LED's
On each of the 2 Ethernet connectors on the IP controller board 2
LEDs are mounted with the same way of operating as a network
switch/router.
With the PoE connector, the status of the green LED will be that
of the orange LED and vice versa.
LED Status
C onnection
G reen
exists
(or orange
C onnection
P oE )
does not exist
Data is being
transmitted
O range
(or green
Bad or slow
P oE )
connection
Display
O n
O ff
Blinking at transmission
speed
Blinking at moderate
speed, modulated on the
data transmission blink
signal
17