Mercedes-Benz AMG GT Operator's Manual page 330

Hide thumbs Also See for AMG GT:
Table of Contents

Advertisement

328 Technical data
Model
Capacity
All models
1.8 gal (7.0 liters)
Notes on brake fluid
Observe the notes on operating fluids
(
page 324).
/
& WARNING Risk of an accident due to
vapor pockets forming in the brake sys‐
tem
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapor pockets may form in the brake system
when the brakes are applied hard.
This causes the braking effect to be
impaired.
Have the brake fluid renewed at the
#
specified intervals.
Have the brake fluid regularly replaced at a
qualified specialist workshop.
Only use a brake fluid approved by Mercedes-
Benz according to MB-Freigabe or MB-Approval
331.0.
Coolant
Notes on coolant
Observe the notes on operating fluids
(
page 324).
/
& WARNING ‑ Risk of fire and injury from
antifreeze
If antifreeze comes into contact with hot
component parts in the engine compart‐
ment, it may ignite.
Allow the engine to cool down before
#
adding antifreeze.
Make sure that no antifreeze spills out
#
next to the filler opening.
Thoroughly clean off any antifreeze
#
from component parts before starting
the vehicle.
* NOTE Damage caused by incorrect cool‐
ant
Only use coolant that has been pre‐
#
mixed with the required antifreeze pro‐
tection.
Information on coolant is available at the fol‐
lowing locations:
In the Mercedes-Benz Specifications for
R
Operating Fluids 310.1
At https://bevo.mercedes-benz.com
-
In the Mercedes-Benz BeVo app
-
At a qualified specialist workshop
R
* NOTE Overheating at high outside tem‐
peratures
If an inappropriate coolant is used, the
engine cooling system is not sufficiently pro‐
tected against overheating and corrosion at
high outside temperatures.
Always use coolant approved by
#
Mercedes-Benz.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents