Mercedes-Benz AMG GT Operator's Manual page 320

318 Wheels and tires
Position support 2 of jack 4
#
port point 1.
Turn crank 3 clockwise until jack support
#
2 sits completely on jack support point
and the base of the jack lies evenly on the
ground.
Turn crank 3 until the tire is raised a maxi‐
#
mum of 1.2 in (3 cm) from the ground.
Loosen and remove the wheel (
/
#
Removing a wheel
Requirements:
The vehicle is raised (
R
Vehicles with AMG ceramic high-perform‐
ance composite braking system:
* NOTE Damage to the ceramic brake disk
when changing a wheel
Mercedes-AMG vehicles with ceramic
brake disks: during removal and reposition‐
ing of the wheel, the wheel rim may strike
the ceramic brake disk and damage it.
Take particular care.
#
Ask another person for assistance or
#
on jack sup‐
use a second centering pin.
When changing a wheel, avoid applying any force
1
to the brake discs, since this could impair the
level of comfort when braking.
page 318).
* NOTE Damage to threading from dirt on
wheel bolts
page 316).
/ Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the uppermost wheel bolt com‐
#
pletely.
Screw alignment bolt
#
instead of the wheel bolt.
Unscrew the remaining wheel bolts com‐
#
pletely.
Remove the wheel.
#
1 into the thread