Mercedes-Benz AMG GT Operator's Manual page 319

Position of jack support points
The jack support point is in the center between
the front and rear wheel arches (arrow).
Cover of jack support points
Before positioning the jack, you must remove
the cover for the jack support point.
To remove: pull the cover down until the lugs
#
are released from the holder.
Fold the cover away in a forward direction.
#
To install: fold the cover towards the body.
#
Pull the cover down and push it in until the
#
lugs engage.
Wheels and tires 317
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at
the appropriate jacking point of the vehicle,
the jack could tip with the vehicle raised.
Only position the jack at the appropri‐
#
ate jacking point of the vehicle. The
base of the jack must be positioned
vertically under the jacking point of the
vehicle.
* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Take the ratchet out of the tire-change tool
#
kit and place it on the hexagon nut of the
jack so that the letters "AUF" are visible.