Mercedes-Benz AMG GT Operator's Manual page 109

Selecting the drive program
Press DYNAMIC SELECT switch
#
or backwards.
The selected drive program appears in the
display 2 and in the multifunction display in
the instrument cluster.
Configuring drive program I
Multimedia system:
Vehicle e DYNAMIC SELECT
4 5
Individual
5
Select the individual setting.
#
Switching the operation feedback for drive
programs on or off
Multimedia system:
Vehicle e DYNAMIC SELECT
4 5
Switch Notification for User
#
When this function is active, a corresponding
message is shown in the media display when
a drive program is selected with the
DYNAMIC SELECT switch.
1 forwards
Displaying vehicle data
Multimedia system:
Vehicle e DYNAMIC SELECT
4 5
Select Vehicle
#
The vehicle data is displayed.
Displaying engine data
Multimedia system:
4
#
%
on O or off ª.
%
Data.
Driving and parking 107
Vehicle e DYNAMIC SELECT
5
Select Engine Data.
The actual (maximum) values that can be
achieved for engine output and engine tor‐
que may deviate from the certified values
within the country-specific guidelines for
permissible tolerances (basis: UN-ECE No.
85 or country-specific guidelines).
Factors that can influence this are, for exam‐
ple:
Sea level
R
Fuel grade
R
Outside temperature
R
Operating temperature of the engine
R
The values displayed serve only as orienta‐
tion. The values for engine output and
engine torque shown in the media display
may deviate from the actual values.