Mercedes-Benz AMG GT Operator's Manual page 187

start message appears and acceleration or
quarter mile measurement will be canceled.
Measuring braking
Select Braking.
#
Select Start Record.
#
Measurement is incremental, in steps of
30 mph (50 km/h) to a standstill. If the brak‐
ing procedure is started e.g. at a speed of
99 mph (160 km/h), measurement starts as
soon as 90 mph (150 km/h) has been
reached.
Storing and calling up measurement values
When a measurement has been completed or
canceled, the measured time can be stored.
After a measurement, select Save measure-
#
ment? .
The stored measurements can be displayed via
the History menu item.
Editing measurements
Select History.
#
Highlight the desired measurement.
#
Select Ü options.
#
Select Weather or Delete.
#
% The measurements can be displayed by cate‐
gory, e.g. acceleration measurements, by
applying a filter.
Calling up the telemetry display
Multimedia system:
Vehicle TRACK PACE
4 5 5
The telemetry display shows current vehicle data
as a digital value and as a diagram.
Up to four parameters can be selected that are
to be shown in the display, such as:
Engine speed
R
Wheel angle
R
Speed
R
Steering angle
R
Set the desired parameters.
#
Set the time.
#
The set parameters are evaluated in the dia‐
gram for the time set.
% The time can range between 30 seconds and
a maximum of 20 minutes.
Configuring AMG TRACK PACE
Requirements:
To use the TRACK PACE app:
The TRACK PACE app is installed on the
R
mobile end device.
Telemetry
The mobile end device is connected to the
R
multimedia system via Wi-Fi.
Multimedia system:
Vehicle TRACK PACE
4 5
Setting driver profiles
Select Driver Profile.
#
Create a new driver profile.
#
or
Select an existing driver profile.
#
The driver profile is activated.
Multimedia system 185
Options
5