Mini 96 Control Unit; Loading Griptips; Setting Pipetting Height; Running A Pipetting Program - Integra MINI 96 Quick Start Manual

MINI 96 control unit

t
s
r
q

Loading GripTips

• Insert the Base stage (b) on the Deck. The graphic "96" or "384" must
• You can load 96 tips four times from racks of 384 tips (12.5 μl and 125 μl
• Hold the Control unit (f) and lower the Pipetting unit (h) down onto the
• Partial tip loading requires the optional Two Position Stage. Press Partial ► and Set No. of
Columns ►. Enter the number of columns filled with tips and press OK. The device adapts the
tip loading strength to the number of tips.

Setting Pipetting Height

Running a pipetting program

Select from predefined programs that you can adapt easily, or create multi-stepped custom
programs.
Program
Pipet
Repeat Dispense
Sample Dilute
Pipet/Mix
Manual Pipet
Reverse Pipet
Variable Dispense
Multi Aspirate
Sample Dilute/Mix
Serial Dilution
Custom
2/4
m. Display
n. Touch wheel, spin to scroll the cursor
m
o. OK button, to make a selection
p. RUN key, to start operations
q. Tip ejector
r. Purge button, to empty tips
s. Arrow buttons, for selections
n
t. Back button, to navigate backward
o
p
match the tip rack pattern. Put a tip rack on the Base stage.
only). Insert the Base stage with side "384" pointing upwards. Move the
tip rack in one of the four corners, e. g. front left.
tip rack until you are prompted to press OK to start automated tip loading.
• To define the lowest possible pipetting height, for ex.
the bottom of a well plate, select Pipetting Height .
• With tips attached move the Pipetting unit down to the
desired pipetting height.
• Press Set  to save your setting.
Description
Liquid transfers when aspirate and dispense volumes are equal.
Dispense multiple aliquots of the same volume.
Aspirate two liquids divided by an air gap, followed by dispense.
Multiple mixing by aspiration and dispensing of defined volume.
Control the aspiration and dispensing up to the set volume.
Liquid transfers of viscous or high vapor pressure liquids.
Dispense multiple aliquots of different volumes.
Aspirate multiple aliquots of different volumes.
Aspirate two liquids divided by an air gap, followed by dispense and mix.
Aspirates a transfer volume followed by a mix.
Creates and store multi-stepped pipetting protocols.
129951_V00_QSG_MINI_96.docx