Basic Safety Precautions - Gossen MetraWatt PROFITEST H+E TECH Operating Instructions Manual

Operating Instructions

Basic Safety Precautions

Guarantee
No guarantee is made with regard to function and safety unless the warnings and safety
precautions included in these operating instructions are observed.
GMC-I Messtechnik GmbH assumes no liability for personal injury or property damage which
occurs due to non-observance of the warnings and safety precautions.
Use for Intended Purpose
The inline tester is intended exclusively for examining the functional performance of charging
stations for electric vehicles with type 2 connector socket (mode 3 charging). Use for other
purposes is prohibited.
Target Group
Only trained, qualified electricians may use the PROFITEST H+E TECH inline tester.
Trained, qualified electricians fulfill the following requirements:
 Knowledge of general and specific accident prevention regulations
 Knowledge of applicable electrotechnical regulations
 Training in use and care of appropriate safety equipment
 Ability to recognize hazards associated with electricity
Warning!
Danger!
The inline tester may only be used at charging points which are tested in accordance with
VDE 0100.
The unit is intended solely for the purpose of diagnostics and cannot be used as a substitute for a
corresponding test instrument!
Find Quality Products Online at:
GlobalTestSupply
www.
PROFITEST H+E TECH
.com
sales@GlobalTestSupply.com
Page 2