Top Panel - Sony PMW-PZ1 Service Manual

5-2.

Top Panel

Procedure
1. Remove the seven screws.
(c)
B3 x 4
Note
When installing the top panel, observe the following instructions.
• Tighten the screws in the following sequence: (a), (b), (c).
• Press and hold the top panel in the direction of the arrow D and install the screw (a).
• Press and hold the top panel in the direction of the arrow E and install the screw (b).
2. Lift the top panel and slide it in the direction of arrow A keeping away from the steps of the main chassis.
3. Slide the top panel in the direction of the arrow B, and remove it.
Steps
A
Note
When installing the top panel, insert the guide of the main chassis into the guiding notch of the top panel.
4. Install the removed parts by reversing the steps of removal.
PMW-PZ1
(c)
B3 x 4
(a)
B3 x 4
(b)
B3 x 4
Top panel
Top panel
(b)
B3 x 4
E
(b)
B3 x 4
Guides of the main chassis
Guiding notch
D
E
(a) (b)
B3 x 4 B3 x 4
Guiding notch
Top panel
B
5-2