Sony PMW-PZ1 Service Manual page 53

2. Remove the four screws, then remove the DY-27 board keeping away from portions A and B of the front frame.
Front frame
Portion B
Note
When installing the DY-27 board, observe the following instructions.
• Align the boss on the front frame with the reference hole of the DY-27 board.
• Tighten the screws in the following sequence: (a), (b), (c), (d).
PMW-PZ1
(a)
PSW2 x 5
(d)
PSW2 x 5
(c)
PSW2 x 5
Portion A
Boss
(b)
PSW2 x 5
Reference
hole
DY-27board
5-9