Error Messages And Warning Messages; Message Lists; Error Messages; Warning Messages - Sony PMW-PZ1 Service Manual

Overview
This unit is provided with a self-diagnosis function to detect internal errors.
When this unit does not work correctly due to malfunction or error in the system, an error message or warning message
appears on the LCD display.
Note
An error is reset after the error cause is removed and the unit is turned off and on.
A warning is reset after its cause is removed.
2-1.

Message Lists

2-1-1.

Error Messages

If an error occurs during operation on the list screen or the thumbnail screen of the unit, an error message pops up.
Code
E001
2-1-2.

Warning Messages

When a warning mark appears during operation on the list screen or the thumbnail screen of the unit, select [WARNING
MESSAGE] on the menu screen to check (display) the warning message.
For operations on the menu screen, list screen, and thumbnail screen, refer to the Operating Instructions.
Message
Low voltage
Low Battery
FAN stopped
UNDERFLOW
TEMPERATURE HIGH
There might be a problem with the SxS
media.
There might be a problem with the ex-
ternal device.
PMW-PZ1
Section 2

Error Messages and Warning Messages

Message Description
Low voltage. PMW-PZ1 Power voltage drop was detec-
will automatically shut ted.
down. PMW-PZ1 is automatically shut
down.
Description
A voltage lower than the value configured
in the DC LOW VOLTAGE ALARM menu
item has been detected repeatedly.
The CMOS backup battery voltage is low.
The internal fan has stopped.
Data readout of the playback file was too
slow.
Temperature in the unit is increased.
Some problem is found with the SxS me-
dia.
Some problem is found with the external
device.
Solution
Use power voltages that meet
the specifications of the unit.
Solution
Check the power supply voltage.
Replace the backup battery.
Replace the fan.
Use a storage device with a faster transfer
speed.
Lower the temperature in the unit.
Recover the unit by using a PC which is
prepared separately from the unit.
Recover the unit by using a PC which is
prepared separately from the unit.
2-1