5-5.
LCD Unit, DY-27 Board
Note
The LCD packing removed from the LCD cannot be reused. When replacing the LCD unit, prepare a new LCD packing.
Required Part
• LCD packing (1)
Preparation
1.
Remove the top panel. (Refer to
2.
Remove the front panel assembly. (Refer to
Procedure
1.
Disconnect the cables and harness.
(1) Open the clamper, then release the three fine-wire coaxial cables and harness.
(2) Disconnect the three fine-wire coaxial cables and harness from the connectors (CN101, CN102, CN103,
CN104) on the DY-27 board. Disconnect the fine-wire coaxial cable from the connector (CN101) on the
KY-740 board.
KY-740 board
Harness
Fine-wire coaxial cables
PMW-PZ1
"5-2. Top
Panel")
"5-3. Front Panel
Clamper
CN103
CN101
CN101
CN104
CN102
Fine-wire coaxial cable
Assembly")
DY-27 board
5-8