Dc Fan (60 Square) - Sony PMW-PZ1 Service Manual

5-10.

DC Fan (60 Square)

Preparation
1. Remove the top panel. (Refer to
2. Remove the front panel assembly. (Refer to
3. Remove the front chassis assembly. (Refer
Procedure
1. Remove the two screws, and remove the DC fan (60 square).
Front chassis assembly
Prevention of incorrect installation
Note
When installing the DC fan (60 square), note the following instructions.
• Pay attention to the position of the label and harness.
• Align the two bosses with the two holes.
2. Install the removed parts by reversing the steps of removal.
PMW-PZ1
"5-2. Top Panel")
"5-3. Front Panel
to"5-9. Front Chassis
Holes
DC Fan (60 Square)
Holes
Label
Harness
Assembly")
Assembly")
PSW3 x 20
PSW3 x 20
5-18