Connector Panel Assembly - Sony DNW-A22 Maintenance Manual

2-3. Removing/Reattaching Cabinet
n
Turn off the power and unplug the power cord before
removing/reattaching.
Lower Control Panel
1. Slightly pull the lower control panel forward, then pull
it more strongly.
2. Remove the five screws on the top and bottom of the
lower control panel.
n
Open the lower control panel to facilitate removing the
screws at the bottom of the panel.
3. Remove the two lugs at the back of the lower control
panel.
4. Remove the lower control panel in the direction of the
arrow.
BVTT3 x 6
Lugs
BVTT3 x 6
When reattaching, install in the reverse order of removal.
2-4
Lower control panel

2-3-3. Connector Panel Assembly

c
For your safety, turn off the power and unplug the power
cord before removing/reattaching.
1. Remove the six screws indicated
panel.
Connector panel
2. Being careful not to stretch the harnesses, remove the
connector panel assembly as shown in the figure.
When reattaching, install in the reverse order of removal.
on the connector
BVTT3 x 6
BVTT3 x 6
BVTT3 x 6
Connector panel assembly
DNW-A22/A22P