1. Manuals
  2. Brands
  3. HOLEMAKER Manuals
  4. Drill
  5. HMSPECIAL140
  6. Operator's manual

HOLEMAKER HMSPECIAL140 Operator's Manual

Portable magnetic
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HOLEMAKER PRO 50
HOLEMAKER PRO 50
Holemaker Portable Magnetic Drilling Machine
OPERATOR'S MANUAL
Holemaker Portable Magnetic Drilling Machine
OPERATOR'S MANUAL
BEFORE USE
BEFORE USE
EYE PROTECTION
REQUIRED
EYE PROTECTION
REQUIRED
S
r e
a i
# l
Ver: 1.10
14/08/2015
S
r e
a i
# l
Ver: 1.10
14/08/2015
WARNING!
,
ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS
OPERATOR'S MANUAL
WARNING!
ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL
,
ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS
ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL
DRILLING MACHINE
WITH ELECTROMAGNETIC BASE
HEARING PROTECTION
NEVER PLACE
REQUIRED
FINGERS NEAR
CUTTING AREA OR
MACHINE ARBOR
P
R
P
R
HEARING PROTECTION
NEVER PLACE
REQUIRED
FINGERS NEAR
CUTTING AREA OR
MACHINE ARBOR
ul. Elewatorska 23/1, 15-620 Białystok, Poland
Phone: +48 85 678-34-95, Fax: +48 85 662-78-77
www.promotech.eu
LINE VOLTAGE
PRESENT
O
1
3
2
T
O
1
3
2
T
LINE VOLTAGE
PRESENT
D
a
e t
f o
P
r u
h c
D
a
e t
f o
P
r u
h c
e-mail:
info@promotech.eu
.
.
BEWARE OF
ROTATING
MACHINE PARTS
BEWARE OF
ROTATING
MACHINE PARTS
a
e s
a
e s

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HMSPECIAL140 and is the answer not in the manual?

Questions and answers

Related Manuals for HOLEMAKER HMSPECIAL140

Summary of Contents for HOLEMAKER HMSPECIAL140

  • Page 1 HOLEMAKER PRO 50 HOLEMAKER PRO 50 Holemaker Portable Magnetic Drilling Machine OPERATOR’S MANUAL Holemaker Portable Magnetic Drilling Machine OPERATOR’S MANUAL WARNING! BEFORE USE ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS OPERATOR’S MANUAL WARNING! ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL...

  • Page 2: Table Of Contents

    Contents 1. GENERAL INFORMATION ....................3 1.1. Application ........................3 1.2. Technical data ......................3 1.3. Equipment included ....................4 1.4. Dimensions ........................ 5 1.5. Design ........................6 2. SAFETY PRECAUTIONS ....................7 3. STARTUP AND OPERATION ................... 9 3.1. Installing the handles ....................9 3.2.

  • Page 3: General Information

    1. GENERAL INFORMATION 1.1. Application The HMSPECIAL140 is a drilling machine designed to drill holes with diameters of up to 140mm by using annular cutters. The machine can also drill holes with diameters of up to 47mm by using twist drill bits.

  • Page 5: Dimensions

    PRO 132T 1.4. Dimensions 487 mm (19″) 332 mm (13″) This document is protected by copyrights. Copying, using, or distributing without permission of PROMOTECH is prohibited.

  • Page 7: Safety Precautions

    PRO 132T 2. SAFETY PRECAUTIONS 1. Before use, read this Operator’s Manual and complete a training in occupational safety and health. 2. Use only in applications specified in this Operator’s Manual. 3. Make sure that the machine has all parts and they are genuine and not damaged. 4.
  • Page 8 PRO 132T 21. Do not use near flammable materials or in explosive environments. 22. Do not use on surfaces that are rough, not flat, not rigid, or have rust, paint, chips, or dirt. 23. Do not use if the gibs are adjusted incorrectly. 24.

  • Page 9: Startup And Operation

    PRO 132T 3. STARTUP AND OPERATION 3.1. Installing the handles Attach the handles to the feed shaft. You can install the shaft so that the handles are on the opposite side of the machine. To do this, lift the motor to the maximum and continue in the sequence that follows.

  • Page 13: Installing And Removing The Screw Tap

    PRO 132T 3.4. Installing and removing the screw tap Install the tap chuck as described before. Next, put the screw tap into the correct adapter (1). Install the adapter into the tap chuck (2). To remove the screw tap, unlock it and remove from the adapter. This document is protected by copyrights.

  • Page 15: Preparing

    PRO 132T 3.6. Preparing Before use, clean steel parts, including the MT4 socket, from anti-corrosion material used to preserve the machine for storage and transport. Attach the handles to the feed shaft. You can install the shaft so that the handles are on the opposite side of the machine.

  • Page 23: Replacing The Motor Brushes

    PRO 132T 3.10. Replacing the motor brushes Every 100 work hours, check the condition of the brushes. To do this, unplug the power cord and remove the cover (1). Lift the spring (2) and remove the brush. If the brush is shorter than 5 mm (0.2″), replace the two brushes with new ones. Install in reverse sequence.
  • Page 26 Parts list PRO 132T v.0.03 ITEM PART NUMBER DESCRIPTION Q-TY UKL-0563-07-00-00-0 COOLANT BOOTLE ASSY OSL-0399-17-00-00-0 SAFETY SPRING OPK-000001 TOOL CAN DZW-0178-09-00-00-0 SPOKE HANDLE ASSY KLC-000037 5 MM HEX WRENCH WITH HANDLE KLC-000009 6 MM HEX WRENCH KLC-000005 2.5 MM HEX WRENCH KLN-0103-00-00-00-0 WEDGE MT3 KLC-000003...

  • Page 27: Mt4 Tap Chuck × 48 Mm With Adapter

    ITEM PART NUMBER DESCRIPTION Q-TY UKL-0563-07-00-00-0 COOLANT BOOTLE ASSY OSL-0399-17-00-00-0 SAFETY SPRING OPK-000001 TOOL CAN DZW-0178-09-00-00-0 SPOKE HANDLE ASSY KLC-000037 5 MM HEX WRENCH WITH HANDLE KLC-000009 6 MM HEX WRENCH KLC-000005 2.5 MM HEX WRENCH KLN-0103-00-00-00-0 WEDGE MT3 KLC-000003 8 MM COMBINATION WRENCH PAS-000008 SAFETY STRAP 500...
  • Page 28 Parts list PRO 132T v.0.03 ITEM PART NUMBER DESCRIPTION Q-TY SLN-0583-01-00-00-1 MOTOR - 230V SRB-000113 HEX SOCKET HEAD CAP SCREW M6x20 PDK-000046 SPRING WASHER 6.1 PDK-000136 SMALL ROUND WASHER 6.4 This document is protected by copyrights. Copying, using, or distributing without permission of PROMOTECH is prohibited.
  • Page 29 Parts list PRO 132T v.0.03 ITEM PART NUMBER DESCRIPTION Q-TY WKR-000193 CROSS RECESSED PAN HEAD SCREW M4x8 NKD-0563-06-00-00-0 COOLANT BOOTLE BRACKET WKR-000531 HEX SOCKET ROUND HEAD SCREW WITH FLANGE M5x35 PDK-000151 NYLON WASHER 8.1x14x3 OSL-0583-08-00-00-0 GUARD SPR-000030 PUSH SPRING TLJ-0563-04-00-00-0 SLEEVE KRP-0583-03-01-00-0 BODY ASSY ZSP-0583-02-00-00-0...

  • Page 30: Mt4 Tap Chuck × 60 Mm With Adapter

    Parts list PRO 132T v.0.03 ITEM PART NUMBER DESCRIPTION Q-TY WKR-000529 TORX PAN HEAD SCREW 4x50 PKR-0563-01-06-00-0 STATOR COVER ASSY PKT-0563-01-06-04-0 POTENTIOMETER KNOB This document is protected by copyrights. Copying, using, or distributing without permission of PROMOTECH is prohibited.
  • Page 31 Parts list PRO 132T v.0.03 ITEM PART NUMBER DESCRIPTION Q-TY PTN-000039 POTENTIOMETER ASSY OSL-0563-01-06-02-0 BUTTON COVER PKR-0563-01-06-01-0 STATOR COVER MDL-0563-80-05-00-0 MODULE TLJ-000151 INSULATION SLEEVE 2.6x3.9 WKR-000458 SCREW FOR PLASTIC 2.2x8 PRS-000238 EXTERNAL RETAINING RING 16z SYG-0563-01-05-01-0 SIGNALLER MDL-0563-80-04-00-0 SIGNALING MODULE WKR-000506 SCREW FOR PLASTIC 3x10 ZSP-0583-17-00-00-1...
  • Page 32 Parts list PRO 132T v.0.03 This document is protected by copyrights. Copying, using, or distributing without permission of PROMOTECH is prohibited.

  • Page 33: Declaration Of Conformity

    Parts list PRO 132T v.0.03 ITEM PART NUMBER DESCRIPTION Q-TY USZ-0583-02-15-00-0 BODY SEAL KLK-000046 DOWEL PIN 5n6x14 PRS-000003 EXTERNAL RETAINING RING 12z KOL-0563-02-03-02-0 GEAR z29 WPS-000082 PARALLEL KEY 4x4x8 WLK-0583-02-02-00-0 PINION SHAFT ASSY LOZ-000161 BALL BEARING 10x26x8 KOL-0583-02-04-00-0 GEAR z34 WPS-0563-02-19-00-1 KEY 6x6x40 WLK-0583-02-07-00-0 PINION SHAFT z12 PDK-0563-02-22-00-0 WASHER 14x22x0.5...

Table of Contents