Sage the Dose Control Pro Instruction Booklet page 4

WE RECOMMENDS SAFETY FIRST
• To eliminate a choking
hazard for young children,
remove and safely discard
the protective cover fitted
to the power plug of the
Dose Control™ Pro.
• Do not place the Dose
Control™ Pro near the edge
of a bench or table during
operation.
• Do not place the Dose
Control™ Pro on or near a hot
gas burner, electric element
or where it could touch
a heated oven.
• Do not operate the Dose
Control™ Pro on a sink
drain board.
• Ensure that the surface is
level, clean and free of water.
• The Dose Control™ Pro is not
intended to be operated by
means of an external timer
or separate remote control
system.
• To protect against electric
shock, do not immerse the
grinder base, power cord or
power plug in water or allow
moisture to come in contact
with these parts.
4
• Always switch the Dose
Control™ Pro off at the
power outlet and unplug
if the Dose Control™ Pro
is to be left unattended,
if not in use, before cleaning,
before attempting to move,
disassembling, assembling
and when storing.
• Do not use attachments
other than those provided
with the Dose Control™ Pro.
• Do not operate the Dose
Control™ Pro without
locking the bean hopper lid
in position. Keep fingers,
hands, hair, clothing and
utensils away from the bean
hopper during operation.
• The coffee grinder should
not be switched on until the
bean hopper and hopper
lid are locked into position
in the grinding chamber.
• Do not operate the Dose
Control™ Pro, continuously
for longer than 2 minutes as
this could cause overheating.
Allow the Dose Control™ Pro
to cool down for 20 minutes
after long operation.