We Recommend Safety First - Sage the Dose Control Pro Instruction Booklet

WE RECOMMENDS SAFETY FIRST WE RECOMMENDS SAFETY FIRST
‰
At Sage we are very safety conscious. We design and manufacture
appliances with your safety foremost in mind. We also ask that
you exercise a degree of care when using any electrical appliance
and adhere to the following precautions.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Before using for the first
time please ensure that
your electricity supply is the
same as shown on the rating
label on the underside of the
appliance. If you have any
concerns please contact your
local electricity company.
• Your Sage appliance
‰
includes a BS 13 amp
moulded mains plug on the
supply cord.
• Should you need to change
this plug, please complete
the rewiring as follows
(after safe disposal of the
moulded plug).
• Please note that a cut off
plug inserted into a socket
is a serious danger risk.
• Wires are coloured as follows:
−Blue = Neutral
−Brown = Live
• As the colours of the wire
may not correspond with
the coloured markings which
identify the terminals in
your plug, please refer to the
following:
−The Blue wire must be
connected to the terminal
which is marked 'N'.
−The Brown wire must be
connected to the terminal
which is marked with the
letter 'L'.
• Please note that if a 13 amp
plug is used, a 13 amp fuse
should be used.
• Remove and safely discard
any packaging material
and promotional labels before
using the Dose Control™ Pro
for the first time.
3