CONTENTS CONTENTS CONTENTS We recommend safety first Getting to know your new appliance Operating your new appliance Care, cleaning & storage Making good coffee Troubleshooting...
WE RECOMMENDS SAFETY FIRST WE RECOMMENDS SAFETY FIRST ‰ At Sage we are very safety conscious. We design and manufacture appliances with your safety foremost in mind. We also ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
Page 4
WE RECOMMENDS SAFETY FIRST • To eliminate a choking • Always switch the Dose hazard for young children, Control™ Pro off at the remove and safely discard power outlet and unplug the protective cover fitted if the Dose Control™ Pro to the power plug of the is to be left unattended, Dose Control™...
Page 5
WE RECOMMENDS SAFETY FIRST • Do not use the Dose Control™ • Appliances can be used Pro for any other purpose by persons with reduced than grinding coffee beans. physical, sensory or mental capabilities or lack of • Do not use pre ground experience and knowledge coffee in bean hopper.
Page 6
Do not operate if damaged in performed by an authorised any way or after the appliance Sage Service Centre. ® malfunctions. Immediately cease use of the appliance and call Sage ® 0808 178 1650.
Page 7
WE RECOMMENDS SAFETY FIRST The symbol shown indicates that this appliance should not be disposed of in normal household waste. It should be taken to a local authority waste collection centre designated for this purpose or to a dealer providing this service. For more information, please contact your local council office.
Page 9
GETTING TO KNOW YOUR NEW APPLIANCE Bean Hopper Lid ACCESSORIES Air tight seal to maximise bean freshness. Adjustable Razor™ Dose Trimming Tool Bean Hopper Trims the puck to the right level for 340g bean hopper with locking system a consistent extraction. for easy removal and bean transfer.
Grind Size Collar to adjust grind size. BEFORE FIRST USE Remove and safely discard all promotional labels and packing materials attached to your Sage appliance. Wash hopper, and cradles ® in warm soapy water and dry thoroughly. Ensure the hopper and the Grind Size Wipe exterior of grinder with a soft damp Collar is aligned properly.
Page 11
OPERATING YOUR NEW APPLIANCE The bean hopper can be removed Step 2: by holding the hopper and turning the Dial Selecting Grind Amount anti-clockwise and lifting hopper to remove. Select the desired amount of ground coffee The locking system allows you to remove required by turning the GRIND TIME dial.
Page 12
58mm, 54mm and 50mm. The 58mm and 54mm are already fitted within the Razor™ Adjust the Razor™ to the setting in the body. The 50mm is separate. table below for your Sage espresso machine. ® This is a starting point for your dose height.
Page 13
® If the Grind Size Collar is tight, machine. run the grinder by pressing the If using the Razor™ with a non Sage espresso ® START|CANCEL button while turning machine, you will need to adjust the depth the Hopper. This will release coffee of the trimmed coffee by trial and error grounds caught between the burrs.
Page 14
OPERATING YOUR NEW APPLIANCE FEATURES OF YOUR Step 2: DOSE CONTROL™ PRO Select the required amount of ground coffee by rotating the GRIND TIME dial. Pause Function Refer to Coffee Chart below for approximate You can pause the grinder during operation, grind amount guide for various brew methods.
Page 15
OPERATING YOUR NEW APPLIANCE ADJUSTING CONICAL BURRS Some types of coffee may require a wider grind range to achieve an ideal extraction or brew. A feature of your Dose Control™ Pro is the ability to extend this range with an adjustable upper burr.
CARE, CLEANING & STORAGE CARE, CLEANING & STORAGE CARE, CLEANING & STORAGE NOTE Empty beans from the hopper and grind Do not use alkaline or abrasive cleaning out any excess beans (see below). agents, steel wool or scouring pads, as these can damage the surface. Unplug power cord from power outlet before cleaning.
MAKING GOOD COFFEE MAKING BETTER QUALITY COFFEE PLUNGER COFFEE Follow these easy steps for a great cup: • Freshly ground coffee is the key to making coffee with more flavour and body. Using a variable temperature kettle, heat the appropriate volume of water to 93°C. •...
TROUBLESHOOTING TROUBLESHOOTING PROBLEM POSSIBLE CAUSE WHAT TO DO Grinder does • Grinder not plugged in. • Plug power cord into power outlet. not start after pressing • Bean hopper not attached • Lock bean hopper into position. START|CANCEL correctly. Refer to the Bean Hopper section button on page 10.
Page 19
Sage Appliances GmbH Johannstraße 37, 40476 Düsseldorf, Deutschland Für den Kundendienst besuchen Sie bitte www.sageappliances.com BRG Appliances Limited Unit 3.2, Power Road Studios, 114 Power Road, London, W4 5PY Freephone (UK Landline): 0808 178 1650 Mobile Calls (National Rate): 0333 0142 970 www.sageappliances.com...
Need help?
Do you have a question about the the Dose Control Pro and is the answer not in the manual?
Questions and answers