Soyer BMK-12W Quick Start Manual page 2

Introduction
This quick start guide is designed to provide you with all the information you need to start up and
operate your stud welder fast and efficiently.
The operating personnel must be able to consult this guide when necessary. Store this guide in a
place accessible to every operator.
F
F
This quick user guide should not be regarded as a substitute for the
comprehensive operating instructions delivered with your stud welder.
Read all of these operating instructions prior to start-up. Please follow all safety
precautions as well as all chapters of these operating instructions before
starting to weld. Non-compliance with the safety precautions can result in
serious personal injuries or death.
SOYER
It is prohibited to transmit or reprint this document, as well as to utilize or disclose its contents,
unless this has been expressly granted.
Non-compliance with this regulation is liable to compensation. All rights reserved, particularly in
the case of a patent grant or a GM registration.
We have verified that the contents of this pamphlet correspond to the hard- and software
described. Deviations, however, cannot be excluded so that we cannot warrant for absolute
compliance.
The illustrations contained in this instruction manual may vary in some details from your
product. This, however, has no influence on the handling of the machine.
The data in this documentation have been verified regularly and necessary corrections will be
incorporated in future impressions. Any suggestions for improvement will be appreciated
We hope you enjoy using the BMK-12W SOYER stud welder as much as we enjoyed developing it.
Date of issue:
Revision:
Print:
© Heinz Soyer Bolzenschweißtechnik GmbH 2008 • All rights reserved
Heinz Soyer Bolzenschweißtechnik GmbH
Inninger Straße 14
82237 Wörthsee-Etterschlag, Germany
Tel.: +49 (0) 8153 - 885 - 0
Fax: +49 (0) 8153 – 8030
www.soyer.de info@soyer.de
Y S
Y S
O R O U R A F E T Y
O R O U R A F E T Y
®
is a registered trade mark of Heinz Soyer Bolzenschweißtechnik GmbH.
01.09.2008
03 Sep. 08
Stud welding – Practical knowledge: BMK-12W
Page - 2
.