Maintenance; Safety Instructions For Maintenance; Changing The Lamps; Replacing Filter Filling - Berbel Firstline Unseen BEH 60 FLU Operating And Installation Instructions For The Models

Maintenance

6. Maintenance
6.1

Safety instructions for maintenance

D WARNING!
Hazard through a disregard of the maintenance
instructions!
This chapter contains important information for the safe
maintenance of the device.
☞ Read through this chapter carefully before carrying out
maintenance work on the device.
☞ Follow the safety instructions.
☞ Carry out the maintenance work as described.
y Repairs only by qualified specialist personnel.
D "1.2 Authorised target groups" (page 4).
y Electrical work only to be undertaken by qualified
electricians.
D "1.2 Authorised target groups" (page 4).
y Maintenance only by authorised users.
D "1.2 Authorised target groups" (page 4).
y No maintenance work permitted by children under
8 years old and persons who would not be able to
properly assess the hazards associated with handling the
device.
y When working at heights, ensure good stable footing
(e.g. stable stepladder).
y The hob and other parts that can be touched must be
cooled down.
y Never open the fan housing.
6.2 Maintenance
6.2.1

Changing the lamps

The device is fitted with maintenance-free LED lighting.
In the event of a fault:
☞ Please consult your dealer or customer services.
30
6.2.2 Replacing filter filling (with recirculated air

mode)

Odours are trapped in the filter filling in the recirculated air
filter. The odour-free, cleaned room air is fed back into the
room.
Recirculated air filters are maintenance-free for up to two
years. Then filter filling must be replaced at regular intervals.
Maintenance intervals
y When the control indicator blinks - every 1000 operating
hours.
D "4.2.4 Filter filling indicator" (page 27).
y With odours in the exhaust air.
y With daily use, after 24 months at the latest.
y With occasional use, after 36 months at the latest.
D ATTENTION!
Danger of property damage through falling parts!
When working on the device, parts of the device or tools
could fall and damage the kitchen equipment.
☞ Protect the cooled hob and other surfaces in the cooking
area (e.g. with thick cardboard).
☞ Move the device parts with the utmost caution.
☞ Lift the filter at least 30 mm.
☞ Remove the filter to the front.
 The replacement of the filter filling is carried out as
described in the associated instructions.
☞ Change the filter filling.
☞ Clean the filter from the outside (e.g. through extraction
with a vacuum cleaner).
☞ Fit the filter again.
D "3.5.7 Install filter (with recirculated air mode)"
(page 21).
6003295_g – 19.03.2019