Grandstream Networks GRP2601 Administration Manual page 82

LDAP Number
Attributes
LDAP Display Name
Max. Hits
Search Timeout
Sort Results
LDAP Lookup
Lookup Display Name
LDAP Dialing Default
Account
Exact Match Search
Application → Call History
Delete
Delete All
Specifies the "number" attributes of each record which are returned in the
LDAP search result.
This field allows the users to configure multiple space separated number
attributes.
Example:
telephoneNumber
telephoneNumber Mobile
Configures the entry information to be shown on phone's LCD. Up to 3 fields
can be displayed.
Example:
%cn %sn %telephoneNumber
Specifies the maximum number of results to be returned by the LDAP server.
If set to 0, server will return all search results. The default setting is 50.
Specifies the interval (in seconds) for the server to process the request and
client waits for server to return. The default setting is 30 seconds.
Specifies whether the searching result is sorted or not.
Default setting is "No".
Configures to enable LDAP number searching when dialing / receiving calls.
Configures the display name when LDAP looks up the name for incoming
call or outgoing call. This field must be a subset of the LDAP Name Attributes.
Example:
gn
cn sn description
Configures the default account used when dialing LDAP contact
Search for exact match result.
Default setting is "No".
Users can select an entry, then click "Delete" to remove it from the list.
Click on Delete All to remove all Call History stored in the phone.
Note: Users could use the drop-down list to show only selected call history
type (All, Answered, Dialed, Missed, and Transferred) and use navigation
keys to browse pages when many entries exist.
GRP260x Administration Guide
Version 1.0.1.18
P a g e | 82