Grandstream Networks GRP2601 Administration Manual page 65

•
Account
Select the account to be associated with the configured MPK.
Value
Enter the value to be associated with the configured MPK
Label
Enter the name to be associated with the MPK.
Shows a preview of the configured MPKs label. After saving, you can print the
Preview
card style in the preview. For more info about how to install the BLF paper label
check the Quick Installation guide.
Basic Settings
Transfer Mode via
Perform blind transfer, attended transfer, or a new call with the specific in the
MPK
Value field when a user presses "Transfer" multiple-purpose key
Enable Transfer via
MPK with type BLF, Speed dial, etc, will perform as transfer MPK under active
Non-Transfer MPK
call
Programmable Keys → Idle screen softkey
Custom Idle Screen
Enables/disables custom softkey layout. Default is disabled.
Softkey Layout
Press on Add Custom Softkey radio button to add/configure up to 3 custom
Custom Softkey softkeys. Supported key modes are speed dial , speed dial via active account
and voicemail.
The softkeys listed under "Enabled" tab will be displayed on the phone's idle
Custom Softkey
screen. Select the softkey from "Available" list to enable it.
Layout
Programmable Keys → Call screen softkeys
Custom Call Screen
Enables/disables custom softkey layout. Default is disabled.
Softkey Layout
Whether to enforce the custom softkey layout position. When set to 'YES', GUI
Enforce Softkey
will still preserve the space if the configured softkey is unable to show.
Layout Position
Default is disabled.
Press on Add Custom Softkey radio button to add/configure up to 3 custom
Custom Softkey
softkeys. Supported key modes are speed dial , speed dial via active account
PBX collects the information from the phones and sends it out in one single
notify message.
Note: The PBX server has to support this feature.
Provision
Select this feature in order to make the phone trigger an instant
provisioning.
GRP260x Administration Guide
Version 1.0.1.18
P a g e | 65