Grandstream Networks GRP2601 Administration Manual page 59

OpenVPN® Transport
OpenVPN® CA
OpenVPN® Certificate
OpenVPN® Client Key
OpenVPN® Cipher
Method
OpenVPN® Username
OpenVPN® Password
Additional Options
Network Settings → Advanced Settings
Advanced Network Settings
Enable LLDP
LLDP TX Interval
Specify the Transport Type of OpenVPN® whether UDP or TCP.
The default value is "UDP".
Click on "Upload" to upload the Certification Authority of OpenVPN®. For a
new upload, users could click on "Delete" to erase the last certificate, and
then upload a new one.
Click on "Upload" to upload OpenVPN® certificate. For a new upload, users
could click on "Delete" to erase the last certificate, and then upload a new
one.
Click on "Upload" to upload OpenVPN® Key.
For a new upload, users could click on "Delete" to erase the last certificate,
and then upload a new one.
Specifies the Cipher method used by the OpenVPN® server. The available
options are:
•
Blowfish
•
AES-128
•
AES-256
•
Triple-DES
The default setting is "Blowfish".
Configures the optional username for authentication if the OpenVPN server
supports it.
Configures the optional password for authentication if the OpenVPN server
supports it.
Additional options to be appended to the OpenVPN® config file, separated
by semicolons. For example, comp-lzo no;auth SHA256
Note: Please use this option with caution. Make sure that the options are
recognizable by OpenVPN® and do not unnecessarily override the other
configurations above.
Controls the LLDP (Link Layer Discovery Protocol) service. The default
setting is "Enabled".
Defines LLDP TX Interval (in seconds). Valid range is 1 to 3600. The default
setting is "60".
GRP260x Administration Guide
Version 1.0.1.18
P a g e | 59