Grandstream Networks GRP2601 Administration Manual page 45

Crypto Lifetime
VQ RTCP-XR Collector
Name
VQ RTCP-XR Collector
Address
VQ RTCP-XR Collector
Port
Symmetric RTP
RTP Timeout (s)
Account x → Call Settings
Call Features
Auto Answer
Custom Alert-Info for
Auto Answer
Allow Auto Answer by
Call-Info/Alert-Info
Allow Barging by Call-
Info/Alert-Info
Send Anonymous
Anonymous Call
Rejection
Call Log
Enable or disable the crypto lifetime when using SRTP. If users set to disable
this option, phone does not add the crypto lifetime to SRTP header. The
default setting is "Yes".
Configure the host name of the central report collector that accepts voice
quality reports contained in SIP PUBLISH messages.
Configure the IP address of the central report collector that accepts voice
quality reports contained in SIP PUBLISH messages.
Configure the port of the central report collector that accepts voice quality
reports contained in SIP PUBLISH messages.
Defines whether symmetric RTP is supported or not. Default setting is "No".
Configures the RTP timeout of the phone. If the phone does not receive the
RTP packet within the specified RTP time, the call will be automatically
disconnected. The default range is 0 and 6-600. If set to 0, the phone will not
hang up the call automatically.
If set to "Yes", the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep. Default setting is "No".
Allows to customize Alert-Info header for auto answer. The phone will auto
answer only if matching content of the custom Alert-info header.
Allows the phone to automatically turn on the speaker phone to answer
incoming calls after a short reminding beep when enabled, based on the SIP
Call-Info/Alert-Info header sent from the server/proxy. Default is "Yes".
When enabled, the phone will automatically put the current call on hold and
answer the incoming call based on the SIP Call-Info/Alert-Info header sent
from the server/proxy. However, if the current call was answered based on
the SIP Call-Info/Alert-Info header, then all other incoming calls with SIP Call-
Info/Alert-Info headers will be rejected automatically. Default setting is "No".
If set to "Yes", the "From" header in outgoing INVITE messages will be set to
anonymous, blocking the Caller ID to be displayed. Default is "No".
If set to "Yes", anonymous calls will be rejected.
The default setting is "No".
Configures Call Log setting on the phone.
•
Log All Calls
GRP260x Administration Guide
Version 1.0.1.18
P a g e | 45