BACNet Flow CoNtroller
DISPLAY NAVIGATION
Main Menu
From the Home Screen press the Menu button to enter this menu. Use Up and Down arrow buttons to navigate through.
FIlter loAD
eCM SPeeD
loCAl eCM
loCAl DIMMING
MAC ADDreSS
DeVICe INSt
PreSS MeNU
to eXIt
Note:
Local setpoints are stored to EEPROM and will remain set after power failures.
4
BACNet FLow CoNtroLLer - Manual | priceindustries.com
Read Only - Displays % of filter loading based on new, clean filter pressure drop
Read Only - Displays the current RPM of the motor
Displays local ECM Setpoint.
Press the Menu button then use the arrow keys to change the ECM Setpoint. Press menu again to save.
Displays local LED Dimming Setpoint (for UFFU w/ BACnet Dimming Control).
Press the Menu button then use the arrow keys to change the Dimming Setpoint. Press Menu again to save.
Read Only - Displays device MAC Address
Read Only - Displays device Instance