Table of Contents
Advertisement
BACNet Flow CoNtroller
NETWORKING & SETUP
Mounting
Use the included DIN rail to securely mount the Front-End
components.
1.
Using 3 screws (by others) mount the DIN rail horizontally
to a secure, accessible surface.
2.
Hang the Price PRTU-WEB onto the DIN rail using the
TOP white clips.
3.
Using the Price Electronics screwdriver, gently pull down
on the BLACK clip, while pushing gently on the WEB-
SERVER towards the DIN rail. The Price Web Server
should click securely into place.
4.
Use the mounting clips on the rear of the BAC-RTR, IP-
RTR, or IP-SWITCH to mount the components to the din
rail. Slip the top clip behind the DIN rail flange, then use
steady pressure to push the component down then back
towards the DIN rail to secure.
5.
The same section of DIN rail can be used to mount
multiple components.
22
BACNet FLow CoNtroLLer - Manual | priceindustries.com
5. To remove, repeat above steps in reverse
BACK VIew oF weB-SerVer
FroNt VIew oF weB-SerVer MoUNteD oN DIN rAIl
reAr VIew oF IP-rtr AND BAC-rtr
SAMPle FroNt-eND MoUNtING oN DIN rAIl
DIN Ra
Back vi
Front vi
Page 8 of 32
Advertisement
Table of Contents
